Fruitcake Posted September 11, 2005 Share Posted September 11, 2005 on the train it gets dirty by itselfe and the stuff they use to buff graffiti isnot made for glue, the stuff gets so hard they have to chizzle it off :D i dont think it will work with dye because the glue is pretty thick and wont mix with ink/dye, it will just float on it. Quote Link to comment Share on other sites More sharing options...
CACashRefund Posted September 11, 2005 Share Posted September 11, 2005 I dont mean like dye as in liquid i mean the powder packs, for liek clothes. Quote Link to comment Share on other sites More sharing options...
Fruitcake Posted September 11, 2005 Share Posted September 11, 2005 ah, i am not familiar with that stuff, i will rack some and see if that works, thanks, it maybe works with gv also but my target is dark blue/purple, they keep buffing my silver marker tags, i want something longer lasting, i m also looking for some stuff that will remove the colour from coloured plastic so my tags will be white after the chemical did its work Quote Link to comment Share on other sites More sharing options...
NeRVe54 Posted September 12, 2005 Share Posted September 12, 2005 id think that superglue would be decent for bombing the side of a t or maybe even a bus so that it would collect mad dirt and be dark. pretty decent idea. think ima look a little further into this... ill hit yous up with anything good. peace Quote Link to comment Share on other sites More sharing options...
MAR Posted September 12, 2005 Share Posted September 12, 2005 So I got some griffin scuff cover and made a mop if i add the aluminum dust will it weather ok? I mean after it rains will it still sparkle? Also will all the dust go with the drips or will most remain where it was applied? Also im pretty dissapointed with the opacity. did I get the right kind of griffin (scuff cover)? Quote Link to comment Share on other sites More sharing options...
5iveDee Posted September 12, 2005 Share Posted September 12, 2005 Is acrylic ink any good? I made a marker out of a zig and just put this green acrylic ink in with nail polish remover, what else would be good to put in so it stains harder? And preferably something clear so I keep the color Quote Link to comment Share on other sites More sharing options...
CACashRefund Posted September 12, 2005 Share Posted September 12, 2005 Originally posted by MAR@Sep 11 2005, 07:50 PM So I got some griffin scuff cover and made a mop if i add the aluminum dust will it weather ok? I mean after it rains will it still sparkle? Also will all the dust go with the drips or will most remain where it was applied? Also im pretty dissapointed with the opacity. did I get the right kind of griffin (scuff cover)? Quoted post The alumium dust if mixed properly will go where th paint goes, so there should be a little bit of it everywhere the paint is. So if it drips then there will be sparkle sin there too. Youre suppose to get this griffin: Quote Link to comment Share on other sites More sharing options...
CACashRefund Posted September 12, 2005 Share Posted September 12, 2005 Originally posted by 5iveDee@Sep 11 2005, 07:57 PM Is acrylic ink any good? I made a marker out of a zig and just put this green acrylic ink in with nail polish remover, what else would be good to put in so it stains harder? And preferably something clear so I keep the color Quoted post Paint wont stain. In most cases, youre better off using ink if you want it to stain. Quote Link to comment Share on other sites More sharing options...
5iveDee Posted September 12, 2005 Share Posted September 12, 2005 I am using ink^ It is acrylic ink Quote Link to comment Share on other sites More sharing options...
illusi0nz_inc Posted September 13, 2005 Share Posted September 13, 2005 im new to this forum, n i been graffin since the start of this year .. n i dont mean to be a fuckhead and change the subject u guys are on, but for the chapstick marker, wat can i use for the tip ? if you guys got any suggestions that work .. and do i put wax on the inside bottom of the chapstick or on the outside twisty bit ? thanks .. Quote Link to comment Share on other sites More sharing options...
shai Posted September 14, 2005 Share Posted September 14, 2005 Originally posted by 5iveDee@Sep 12 2005, 02:30 PM I am using ink^ It is acrylic ink Quoted post Like airbrush ink? That shit is cool...I had a bottle of Deka crimson that looked like blood. Otherwise, I dunno... Quote Link to comment Share on other sites More sharing options...
5iveDee Posted September 14, 2005 Share Posted September 14, 2005 well I got some higging eternal permanent ink, mixed it with a kiwi, it is too thin, what should I put in it to thicken it up? Quote Link to comment Share on other sites More sharing options...
shai Posted September 14, 2005 Share Posted September 14, 2005 Leave out the kiwi juice, it's schiesser, as the Germans would say. Quote Link to comment Share on other sites More sharing options...
5iveDee Posted September 15, 2005 Share Posted September 15, 2005 too late lol, Also I love the white kiwi, wtf can I put in that so it stains more? I have been just using it by itself right now, and it comes out. looks dope Quote Link to comment Share on other sites More sharing options...
TeezerPHM Posted September 15, 2005 Share Posted September 15, 2005 if you wanna use white kiwi the best shit you can do is add a little bit of paint (i used a small jar of krylon short cuts, very rackable) and you mix it in the shoe polish...........i did this years ago and have shit still running Quote Link to comment Share on other sites More sharing options...
5iveDee Posted September 15, 2005 Share Posted September 15, 2005 k thanks too late for tonight but its all good, actually I think I might have some in the tool room Quote Link to comment Share on other sites More sharing options...
MAR Posted September 15, 2005 Share Posted September 15, 2005 sucessfully made my mop and rocked it over town. My recipe just in case someone cares: Griffin scuff cover (black), medium sharpie poster paint marker, copper colored aluminum dust . and small pieces of metal for mixing i dumped it into a o'glue pen and ran around town. sparkle coverage is pretty good it makes you do a double take. next time ill use a lighter metal, like silver or light gold. Quote Link to comment Share on other sites More sharing options...
illusi0nz_inc Posted September 15, 2005 Share Posted September 15, 2005 Originally posted by MAR@Sep 15 2005, 01:19 PM sucessfully made my mop and rocked it over town. My recipe just in case someone cares: Griffin scuff cover (black), medium sharpie poster paint marker, copper colored aluminum dust . and small pieces of metal for mixing i dumped it into a o'glue pen and ran around town. sparkle coverage is pretty good it makes you do a double take. next time ill use a lighter metal, like silver or light gold. Quoted post hah .. i made my chapstick marker yesterday , it leaks like fuck .. everytime i open it to use it, ink goes all over my hands ! it works pretty damn good though .. Quote Link to comment Share on other sites More sharing options...
shai Posted September 15, 2005 Share Posted September 15, 2005 Stupid browser..keep going, the next one is the one to look at. Quote Link to comment Share on other sites More sharing options...
shai Posted September 15, 2005 Share Posted September 15, 2005 You want an opaque ink? Here's one of my favorites. I've been waiting for someone to bring it up. [attachmentid=21443] This is Marsh Rolmark. It's a white ink that works really, really good...if you do it right, and it takes practice. Get a can of this. It's out there, trust me. [attachmentid=21444] This is the tint. It can be found at almost any stationery store. Works well alone, too. Usually marketed as Viking or Procolor. Comes in different colors. Pick one. [attachmentid=21447] Fill up a mop (no pens!) almost to the top with Rolmark. Start with the tint...I usually add 10 drops at first, then see how that is. To lighten, add white. To darken, add tint. Put a shaker in, like a small nut or bolt- as long as it fits, and won't clog the valve. Put on the valve and cap, shake for a minute, and try it out. [attachmentid=21448] This came out a little dark, but that's okay. It will shadow more on porous surfaces. This is on vinyl- not porous in the least. Try mixing tints to get different colors. Also, almost any stamping ink will work- I made a flourescent yellow mop the other day...the pic doesn't do it justice, but it's bright. [attachmentid=21449] Three cons to Rolmark- one, it smells like cat piss. Two, I've never found a solvent for it. It's pretty thin already- in a pinch, I'll let the can settle for a while and pour a bit off the top to cut a mix. And, three- the first couple times you try it, it seems streaky...shake the can for five minutes, and go slow with the line, and it's magic. As far as where to find Rolmark? I've found it in every city I've lived in for the past ten years, so it's available. Trust me. The shit runs forever, too...the white lasts the longest, by far. I've seen five year old white tags of mine looking like new. It's got the nice, even Marsh drips. And, it shadows pretty well. I feel like I haven't kept up here, lately, so I thought I'd share a good one with everyone. All I ask, is that if you are a toy, wait till you can come off well to use this. It was hard to give this up, so do right by it. [attachmentid=21450] Here's the door prize. I found these a while back. They're the size of a Pilot, made of hard plastic, screw cap, mop tip. They work really good vertically and not so good horizontally, since you can't squeeze them. What IS it? I call it a Men or a Pop, depending...weird. Quote Link to comment Share on other sites More sharing options...
flip words Posted September 15, 2005 Share Posted September 15, 2005 damn shai you crazy haha. sick ass lookin inks though for real Quote Link to comment Share on other sites More sharing options...
toggle Posted September 15, 2005 Share Posted September 15, 2005 question... does anyone know if the kind of ink that is used to refill printer ink cartriges if alright for busting, im mad bored at work so i made a lil glue stick marker, the only ink around, was the ink mentioned earlier, throughout the process i got a shit load on my hands. i know it stains hands, but what about other things, anyone have any experience with something like this. i tryed right on some cardboard and it didnt cover very well... any help? Quote Link to comment Share on other sites More sharing options...
shai Posted September 16, 2005 Share Posted September 16, 2005 Stamp refill ink (Procolor, Viking) is in almost every office, and I use it all the time, with great results. The bottles can be used as a pen, too...wait, are you bombing at work? Wow, you must hate your job. Be careful, that shit has a weird way of biting you in the ass. Oh, the ink jet ink isn't too hot, btw...powder toner is a good ink additive, however. Take some home and try it out. Quote Link to comment Share on other sites More sharing options...
WhiteOx Posted September 18, 2005 Share Posted September 18, 2005 someone hit me up with a krink recipe. please Quote Link to comment Share on other sites More sharing options...
WhiteOx Posted September 18, 2005 Share Posted September 18, 2005 ( I gather its oil based chrome paint, thinned down with xylene but whatever.) Quote Link to comment Share on other sites More sharing options...
shai Posted September 18, 2005 Share Posted September 18, 2005 http://www.krink.com/ Fuck the rest, use the best...he ships worldwide. There's no excuse. Quote Link to comment Share on other sites More sharing options...
CACashRefund Posted September 18, 2005 Share Posted September 18, 2005 who cares what the bottle is made of, what the logo is JUST GIVE ME THE FUCKING KRINK!!!!! AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH! Quote Link to comment Share on other sites More sharing options...
shai Posted September 18, 2005 Share Posted September 18, 2005 hummanahummanahummanaMOMMMMMMM! MOMMMMMMM! THROW DOWN SOME MON-AAYYYYY! DA ICE CREAM MAN IS COMING!!!! I just ordered this... [attachmentid=21573] Then I'll put inna this thang...I'm drunk. Quote Link to comment Share on other sites More sharing options...
shai Posted September 18, 2005 Share Posted September 18, 2005 Cash, you know you want that bottle..come on. I want that bottle...filled with some hard drink. Quote Link to comment Share on other sites More sharing options...
MC P. Posted September 18, 2005 Share Posted September 18, 2005 I have a question about that krink... like the actual shit, not the homemade shit... can you put that in a regular pilot or other type of marker since its ink and not paint?? Or is it too thick? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.