Talkofthatown919 Posted March 17, 2011 Share Posted March 17, 2011 anyone know where to get the hard nibs for the ultra wide markers? Quote Link to comment Share on other sites More sharing options...
Darkeist Posted March 18, 2011 Share Posted March 18, 2011 can you get those scribes at michaels? i also heard a drill bit worked, i tried a philips head one and it didnt work..maybe a flathead? or wat Quote Link to comment Share on other sites More sharing options...
Tuco Salamanca Posted March 18, 2011 Share Posted March 18, 2011 anyone know where to get the hard nibs for the ultra wide markers? i think you can only find the soft ones now. Quote Link to comment Share on other sites More sharing options...
LICKERISH Posted March 18, 2011 Share Posted March 18, 2011 dremel bits for scribes, or bits of sandpaper (heavy grit), some rocks will work also Quote Link to comment Share on other sites More sharing options...
Talkofthatown919 Posted March 18, 2011 Share Posted March 18, 2011 i think you can only find the soft ones now. aight preciate it was a pain to get the nib in Quote Link to comment Share on other sites More sharing options...
Darkeist Posted March 19, 2011 Share Posted March 19, 2011 got some zig woodcrafts or something from the store..i like em Quote Link to comment Share on other sites More sharing options...
STYLEISKING Posted March 21, 2011 Share Posted March 21, 2011 Quote Link to comment Share on other sites More sharing options...
Pew_Pew_Pew Posted March 21, 2011 Share Posted March 21, 2011 ^freakin love these pics man Quote Link to comment Share on other sites More sharing options...
1dumbNut Posted March 23, 2011 Share Posted March 23, 2011 everyone raving about these marker pics might find this interesting http://www.fourgsmagazine.com/2011/2011-03/500-marker-poster.html 1 Quote Link to comment Share on other sites More sharing options...
Darkeist Posted March 27, 2011 Share Posted March 27, 2011 dremel bits for scribes, or bits of sandpaper (heavy grit), some rocks will work also dremelbits like the ones with sandpaper or wat. i have a dremel set i just dont know what to use since some are missing Quote Link to comment Share on other sites More sharing options...
LeadingEdge Posted March 27, 2011 Share Posted March 27, 2011 Most work, go test them out and see! Quote Link to comment Share on other sites More sharing options...
Darkeist Posted March 27, 2011 Share Posted March 27, 2011 fuck ye ai found a badass one. cant wait for scratchies Quote Link to comment Share on other sites More sharing options...
<--PageOne--> Posted March 28, 2011 Share Posted March 28, 2011 anyone got a tip on what kind of pen u can use to do highlights on blackbook sketches. i just started with graffiti again and trying to figure stuff out. got myself some alpha design markers (same shit as copic) and i need some pen to do highlights. i could use posca, but i dont want the straight edges of highlight, i want more of a fade kind of highlight. Like eaz uses in on of his videos : http://www.youtube.com/user/silverpoundcans#p/u/0/Ew0UOxz5Q2w cant see what kind of pen he is using, but the results he get is exactly what im thinking of. Quote Link to comment Share on other sites More sharing options...
Pew_Pew_Pew Posted March 29, 2011 Share Posted March 29, 2011 ^He isn't using a marker or a pen. That's a white pencil. It could also be a prismacolor colorless blender. They have those as pencils or markers. Basically alcohol in a marker. Quote Link to comment Share on other sites More sharing options...
<--PageOne--> Posted March 29, 2011 Share Posted March 29, 2011 Ah ok. Thanks alot Quote Link to comment Share on other sites More sharing options...
Miyagi San Posted April 24, 2011 Share Posted April 24, 2011 :D Quote Link to comment Share on other sites More sharing options...
faseonepk Posted April 26, 2011 Share Posted April 26, 2011 Hell yeah! I have that issue of Mass Appeal boxed up somewhere in the house. Gotta love the tools of the trade issue. Quote Link to comment Share on other sites More sharing options...
STYLEISKING Posted April 28, 2011 Share Posted April 28, 2011 Quote Link to comment Share on other sites More sharing options...
STYLEISKING Posted April 28, 2011 Share Posted April 28, 2011 Quote Link to comment Share on other sites More sharing options...
jarvis Posted May 2, 2011 Share Posted May 2, 2011 would anyone happen to know the formula and proportions to make an opaque, free flowing, refill for paint markers such as decos, unis, etc... i would assume it to be oil based paint and xylene but i feel like there's something missing from the formula or that the proportions are very specific (i keep ending up either with too much transparency, or a thickness that inhibits flow.) Quote Link to comment Share on other sites More sharing options...
yeahnation Posted May 2, 2011 Share Posted May 2, 2011 would anyone happen to know the formula and proportions to make an opaque, free flowing, refill for paint markers such as decos, unis, etc... i would assume it to be oil based paint and xylene but i feel like there's something missing from the formula or that the proportions are very specific (i keep ending up either with too much transparency, or a thickness that inhibits flow.) Instead of concentrating on the right mixture of paint, maybe you should do more work with the actual marker. Maybe try a new nib, or find more of a mop-like marker that has the same width. Here are some suggestions: If you're dead set on finding the right balance of paint and thinner, keep trying things out. Maybe you'll get lucky. But you're right... Stick with oil based paint and xylene. You don't have to use xylene, either. Paint thinner would work just as fine. Try softening up the nib if you find the paint mix to be too thick. Mashing up the end or poking holes with a needle usually does the trick for me. Rack a shit ton of unis and decos. They're easy to come by, and not scarce at all, which means if you have the ability to have a big stock, why waste time and effort trying to make your own? There are a lot of deco-sized mops out there that you can squeeze, which eliminate the flowing problem. Hit up any arts and crafts store like Michael's and I guarantee you'll find something. Good luck. Quote Link to comment Share on other sites More sharing options...
KADE_ONE Posted May 12, 2011 Share Posted May 12, 2011 i migth be late on this but i heard you can refill pentel shortys? if you know how let me know or pm me Quote Link to comment Share on other sites More sharing options...
LUGR Posted May 12, 2011 Share Posted May 12, 2011 ^ I think it was mentioned before in regards to refilling a Pentel White L. I think the person who did it made some major mods to the marker (forcing the marker open and resealing). As far as I know there are no simple ways to do this and it does not seem worth it all. If you discover something different, let us know. Maybe a syringe down the nib could work? Again, probably not worth the time and effort. Quote Link to comment Share on other sites More sharing options...
ThisWarIsNoise Posted May 15, 2011 Share Posted May 15, 2011 is the ink that comes in kiwi's worth keeping? I have used it its pretty bold but is it permanent? Quote Link to comment Share on other sites More sharing options...
yeahnation Posted May 16, 2011 Share Posted May 16, 2011 is the ink that comes in kiwi's worth keeping? I have used it its pretty bold but is it permanent? What type of Kiwi are you using? White, black, wax, dye? All of that matters. The black dye actually does stain considerably well, though most people prefer to use it in conjunction with other inks (garvey or marsh-type inks, usually). Honestly, the word "permanent" should be erased from all of our vocabularies. Nothing is permanent; if somebody wants to get shit off of their wall, they will use cleaners, solvents, and hundreds of coats of paint to get rid of it. Instead, you should be concerned with two things: water-resistance and stability. This applies to both outdoor and indoor ink. Outdoor ink, it should be there through the rain (water-resistance), and it should be able to withstand the wear and tear (stability... i.e., shouldn't get rubbed off, fade in the sun). Indoor ink, it shouldn't be able to be wiped off with water, and it should be stable enough to handle writing on any surface. Anyways... Sorry for the ramble. Here's my point: if you have something to write with and you have something to write on, it shouldn't matter what kind of ink you use. 100 tags with cheap shoe dye are way better than 10 tags with expensive-ass, designer ink. It's about getting up. Nothing else. Well, being good at it too. Quote Link to comment Share on other sites More sharing options...
Darkeist Posted May 16, 2011 Share Posted May 16, 2011 i dont worry bout the bullshit, if theres a surface and somethign to write on it with im gonna write my name. Quote Link to comment Share on other sites More sharing options...
STYLEISKING Posted May 16, 2011 Share Posted May 16, 2011 Quote Link to comment Share on other sites More sharing options...
Umad Posted May 16, 2011 Share Posted May 16, 2011 1Love Nice stash Quote Link to comment Share on other sites More sharing options...
Jakro Posted May 16, 2011 Share Posted May 16, 2011 anybody try out the kingpen escobar? 500 tags per marker here's proof. supposedly it's exactly the same as krink but they use paint, and they fill it completely unlike the krink k-71. kinda stoked on this http://www.kulturez.enstore.com/item/kingpen-escobar-large Quote Link to comment Share on other sites More sharing options...
Talkofthatown919 Posted May 16, 2011 Share Posted May 16, 2011 uni paint marker filled up and put a different name on it thats it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.