DIC3 Posted June 8, 2012 Share Posted June 8, 2012 Recently, I noticed my teacher having a wide whiteboard eraser, that sorta looks like an x-tra wide Markwell mop. I suddenly got the idea of turning these erasers into mops. I haven't got any yet to try it out, but the idea's up for grabs. The erasers sorta look like these ones, but much wider. 1 Quote Link to comment Share on other sites More sharing options...
zoh Posted June 9, 2012 Share Posted June 9, 2012 bro if i can get my hands on some il try it not sure how you would get a cap to go over the nib though getting the ink to flow is simple enough you just have to strip the original nib and contents hollow out the cap fill with ink put cap back on and like duct tape it shut so it doesn't pop open and leak ink everywhere or to be safer put a ring of glue around where the cap clips onto the marker and tape over it to make sure it doesn't explode but the problem is having a cap for the eraser part il prob grab a couple of these and see if i can get them to work 1 Quote Link to comment Share on other sites More sharing options...
ipod90 Posted June 9, 2012 Share Posted June 9, 2012 ^ Stay in school kid and don't skip English class especially. 1 Quote Link to comment Share on other sites More sharing options...
public617 Posted June 9, 2012 Share Posted June 9, 2012 test it in the faculty restroom bro. you might just turn graff upside down with your ideas. Quote Link to comment Share on other sites More sharing options...
DIC3 Posted June 13, 2012 Author Share Posted June 13, 2012 Yeah...I'd only do that in my senior years lol Quote Link to comment Share on other sites More sharing options...
MOOGLE? Posted July 10, 2012 Share Posted July 10, 2012 bro if i can get my hands on some il try it not sure how you would get a cap to go over the nib though getting the ink to flow is simple enough you just have to strip the original nib and contents hollow out the cap fill with ink put cap back on and like duct tape it shut so it doesn't pop open and leak ink everywhere or to be safer put a ring of glue around where the cap clips onto the marker and tape over it to make sure it doesn't explode but the problem is having a cap for the eraser part il prob grab a couple of these and see if i can get them to work ^thought the same thing hollow out a hole large enough for the original nib in the pen part to make full contact with the cap nib make a semi wide hole through the entirety of the original hole so as to allow fluid from the filter to the eraser nib the problem. the pen/marker case is made of hard plastic and it does not allow you to express ink/paint mixtures upwards to the nib. also pens/markers of this type tend to dry out quickly due to gravity..meaning the nib must always be facing toward the ground unless the ink/paint you refill it with is xylene based. you would need to seal the cap to the marker with an adhesive that doesn't corrode with your mixture...personally i'd just melt the fucker on there. i i can see this working with really watery ink , but covering the top nib would be a pain in the ass. good luck though Quote Link to comment Share on other sites More sharing options...
Got Milk Posted August 6, 2012 Share Posted August 6, 2012 Pretty cool idea i guess but far too much effort for what its worth.. Save your pennies and invest in a couple of mops from your local store/favourite site. 1 Quote Link to comment Share on other sites More sharing options...
post Posted December 19, 2012 Share Posted December 19, 2012 Remember those glue bottles with the sponge as the tip, that everyone probably hated. they're only like less then a dollar at the dollar store, I was thinking about trying to just fill one up with ink. Quote Link to comment Share on other sites More sharing options...
tango 24 Posted December 19, 2012 Share Posted December 19, 2012 2 posts in 10 years, holy shit Quote Link to comment Share on other sites More sharing options...
tango 24 Posted December 19, 2012 Share Posted December 19, 2012 you're like the Halley's comet of 12oz Quote Link to comment Share on other sites More sharing options...
post Posted December 21, 2012 Share Posted December 21, 2012 you're like the Halley's comet of 12oz lmao Honestly, that was a mistake from the site I guess. I joined the 18th. Quote Link to comment Share on other sites More sharing options...
desism_ktc Posted December 29, 2012 Share Posted December 29, 2012 get some erasers and empty speed stick canisters and ink… then get ready for a mess… Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.