INK RECIPE SUPERTHREAD

[heirkb]

thanks for the help asdf...i just went on a lull and didnt get up at all for a coupla weeks so the mops sadly dried away. it hurt me cause i had a sexy yellow one, and a silver one...both dry and worthless now...ima have to follow my own guide and remake nibs for those things...

[asdf_va!]

^^That's a bummer.

 

DOT3... It doesn't burn, stain, fog, or ghost

anything. If you see a ghost... it's the greasy

oil that is left behind. Skag is correct. About a

hundred pages back we had this very same

discussion. DOT3 is just to prolong the drying

time to allow for super long drips. This is true.

 

This incredible rumor about it doing anything

other than being oily and making your drying

time longer is just that... An incredible rumor.

 

Try it out. Go put some DOT3 on metal and

see if it eats into it. See if it eats into anything.

It won't even "eat" it's way through paper.

Try it.

 

Good luck...

[chetdog]

Acee's Witches brew is some good shit......peep it out if you dont know.

 

er holler.

 

:D

[LIV3ONE-CityOfWind]

Smeero did an etch tag over my marker tag, looks like the ink is permantly stained on the glass now. Which is why I figured you could mix a lil ink in your etch to make colored etch. I have a fealing it might work. Put a couple drops of ink in your etch and see.

[20rock]

^^^u mite be right

ive seen a light purpleish etch tag on diversy some where.

etch is weird

theres a bunch of different ways it comes out

 

these are the weirdest ones

i think its wen u mix the bath and armour

[Freughtaholic]

i know it was covered a few pages back but what exactly does pvc primer do?

[heirkb]

^^^it supposedly eats into plastic to get it primed for glueing so its supposedly good for your ink. i put it in my ballpoint ink but dunno how it works cause i havent checked any of the spots i hit with the ballpoint ink...

[Earthworm Jim]

i have plenty of bucket paint but no thinner, are there any things i can use to thin it out i can find around the house? like alcohol or anything?

[androidx]

Thinner, it's not that expensive.

[muvotwo]

i mixed dot3,inferno and grog,it did not come off the plastic.............is ther a point in mixin two highly perminant inks like tha?

[androidx]

I mix marsh with oink. In my opinion, these are the two best inks. Could never go wrong with mixing them.

[asdf_va!]

Mixing high quality inks is a great idea.

 

EJim... Is your paint latex or oil based??

Just because it's in a bucket doesn't mean

that it's oil based, and thinning latex with

thinner will destroy it. Don't put alcohol in

paint. Read the first page of this thread.

Tons on information.

 

If it's latex paint you can use water to

thin it. Don't put it in anything but a mop

or a drip bottle, and don't expect the mop

to last. The latex dries too fast and will turn

the nib into a rubber clogged up nib.

 

Go for the drip bottle, or white out pen with

the latex. Good luck...

[heirkb]

aight mods, im not an advertiser for oink and you can see my opinions about buyin ink and paint in my posts to prove it, but that shit looks ill! i watched the youtube videos and he painted over it twice and it bled through CLEAN...ridiculous shit...

i guess this post is the same as anyone else's posts saying marsh or whatever is dope so i havent sinned...

[asdf_va!]

You can say what you want... but you

can't push advertisements. You can

talk about mixing bands and using the

brand name. Just don't drop links to

shops when it doesn't apply.

 

I have recently fell back in love with

DED insides. Found a few old bottles

in some boxes and threw some inside

blue into a kiwi... Goddamn... it's so

smooth. I personally mix DED and

Oink in mops:

 

 

...and I totally put Oink

in Griffin when I can find it:

 

 

Keep your eye's open for Griffin at old

shoe repair stores and places of that

sort. It rules.

[androidx]

Searchin so hard for that griffin.. so hard to find.

[LIV3ONE-CityOfWind]

I been usein griff for over 10 yrs. I love it.

[LIV3ONE-CityOfWind]

^^^u mite be right

ive seen a light purpleish etch tag on diversy some where.

etch is weird

theres a bunch of different ways it comes out

 

these are the weirdest ones

i think its wen u mix the bath and armour

 

Yea it really stands out when the etch is white like that. DOPE!!!

[asdf_va!]

It's probably best if you guys take those flicks

down, or at least don't express any personal

involvement. It's bad for you and the site.

Lot's of local PD's are taking etch really seriously

and they are totally on the internet. I doubt that

any enforcement agents are on this thread, but

they are totally on this site... that's for sure.

 

And using etch is one small step down from

breaking the window, with a brick that has your

tag on it, because only a small percent of etched

windows can be repaired. So while graffiti IS illegal,

for the most part it can be buffed out. Local PD's

are taking etch as a serious criminal offense because

of the cost to replace a 4x10 foot plate of glass. $$$.

 

I am not, never have been and will never be, a cop.

I am not associated with any enforcement agency

against anything... except for bike thieves. Steal a

bike, I steal you in your grill.

Word up.

[urban art 415]

It's probably best if you guys take those flicks

down, or at least don't express any personal

involvement. It's bad for you and the site.

Lot's of local PD's are taking etch really seriously

and they are totally on the internet. I doubt that

any enforcement agents are on this thread, but

they are totally on this site... that's for sure.

 

And using etch is one small step down from

breaking the window, with a brick that has your

tag on it, because only a small percent of etched

windows can be repaired. So while graffiti IS illegal,

for the most part it can be buffed out. Local PD's

are taking etch as a serious criminal offense because

of the cost to replace a 4x10 foot plate of glass. $$$.

 

I am not, never have been and will never be, a cop.

I am not associated with any enforcement agency

against anything... except for bike thieves. Steal a

bike, I steal you in your grill.

Word up.

 

 

:lol: u musta had your bike stolen before prolly a nice one too haha

i don't see a reason y people should pull the pictures down, i can't even tell what street it's on

[asdf_va!]

:lol: u musta had your bike stolen before prolly a nice one too haha

i don't see a reason y people should pull the pictures down, i can't even tell what street it's on

 

It doesn't matter what YOU know or think.

I know that it's easy for ME to figure out, so it's

easy for the wrong people to figure out as well.

 

Personally I don't subscribe to "Nice Bikes."

But thanks for the pointless comment.

[20rock]

if u really think so i'll take em down

i dont use etch

was just wondering about it

 

but do u kno y it burned that way asdf?

[20rock]

.....

[SerialSkiller]

You can say what you want... but you

can't push advertisements. You can

talk about mixing bands and using the

brand name. Just don't drop links to

shops when it doesn't apply.

 

I have recently fell back in love with

DED insides. Found a few old bottles

in some boxes and threw some inside

blue into a kiwi... Goddamn... it's so

smooth. I personally mix DED and

Oink in mops:

 

 

...and I totally put Oink

in Griffin when I can find it:

 

 

Keep your eye's open for Griffin at old

shoe repair stores and places of that

sort. It rules.

 

why did you tape up the whole mop?

 

very curious

[DJSupreeme]

just use etch on bus shacks and shit..

 

don't do it on store fronts though cause that shit is too expensive for em to clean. we don't need more people hatin graff then there already is

[asdf_va!]

20:

When you mix the Etch Bath with

the Etch cream it has a thicker

consistency and stays on the window

longer than with just the bath. It's

actually REALLY dangerous to people

walking by that might touch it while

it's still wet. More Etch means more

burnt window causing the white. That

white stuff can be scraped off easily.

But you still have a super deep etch.

 

Thirst:

I tape up that mop so that if

I don't have time to stash it in my

pocket I can just make a fist. You

wont see a black mop in my hand,

but you will see a bright white one.

[20rock]

kool thanks

so basically the armour etch just leaves a chalky white effect on the window that can be scraped off. the cream doesnt burn at all?

 

i cant take off the pictures

wont let me edit it

[asdf_va!]

You're fine, but it's a in the future

kinda thing.

 

The Cream burns more than the Bath.

When you mix them, you get drips but

a lot of it just sits and works longer than

normal. Nasty stuff if that's what you are

trying to do.

 

You should be fine on the flicks. All I was

saying was don't self promote etching on a

public website. IP addresses tell more than

you think. Good luck...

[20rock]

the cream really burns more?

ppl have told me it left a chaulky type thing that could be wiped off with water

idk

thanks anyway...

[heirkb]

that taping the mop up actually makes a lotta sense...ima do that to mine...asdf with the knowledge...

[asdf_va!]

the cream really burns more?

it left a chaulky type thing that could be wiped off with water...

 

Totally true. The chalky white stuff is the leftover

acid burnt window. The more the of the white chalky

stuff, that can be easily wiped off, the deeper they

etch has actually burned. Just think of the white

chalky as the ash after a fire.

Kinda the same thing.

 

Just the bath alone will not really get the white

ash. It burns only a small amount and leaves

the window hazy, or fogged over. This type of

etch (the Bath) can be repaired in some cases

but the cream does major destruction.

 

Hope that explained it better.