Big Bruno Posted February 13, 2002 Share Posted February 13, 2002 im in the process of writing an explanatory essay "How to produce a silkscreen" and i know there are some screenprinters on this board(ie. blackham). if anybody has any tips or tricks that they use i would appreciate you sharing them with me. thanks Link to comment Share on other sites More sharing options...
juggernaut Posted February 13, 2002 Share Posted February 13, 2002 i figured this one out last night: when lining up the screen to the film on a multi-color job, tape the film (with the bullets lined up perfectly) to the bottom of the first screen and put a few pieces of rolled up masking tape on the back of the film. when you drop the screen to the table, put a t-square between the film and the screen and break the tape or pull up gently so it un-sticks. if you've done it correctly the first screen will be lined up perfectly. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.