Scribes, Scrapes, Scratchers Superthread

[WorldBench]

Put these in Pens and Markers, cut marker/pen to fit the bit, hot glue it in, seal voila. Ive made a few recently, ill post up later.

 

 

 

 

 

[WorldBench]

 

 

[EarToTheGround]

Here's how I made a few recently that I sent out(penpal thread)

 

what you'll need:

a pliers

a knife or boxcutter

a pen with a plastic end and a cap,preferably one you can't see through.

a lighter,

a dremel bit, like the one in the middle here:

and super glue.

 

pull out the ink tube and nib from the pen

depending on the pen you might want to widen the dremel bit with some teflon tape or maybe electrical tape if the hole is too big.

maybe cut a little off the top of the pen to make the hole a bit bigger

heat up the end of the dremel bit and shove it in the end

(you know,get it in there somehow)

super glue around the outside(inside too if you have good aim)

let it dry before you put the cap on!

cap it and you got a stealth scribe.

 

tweak the directions as needed depending on the pen.

 

/suckatdirectionsoner