MARKER SUPERDUPERTHREAD

[artsol]

my current ink deally is : crappy ink in the Bingo Dabber, Peroxide, Bleach,Peroxide and Dishwashing liquid...although the so called crappy ink of the bingo dabber is part of the recipe, it's good...the drips are ill, the consistency is nice, and supposedly the bleach/peroxide will make a ghost when / if it's buffed

[Dirty_habiT]

How about this, how does one go about getting pilot ink out of clothing? Oxiclean is bullshit, that shit didn't budge the black stain. I used lighter fluid but that just made the stain bleed. Oh, well, I've got a new pair of painting draws if I can't get that negroness out my pants.

 

--I'm black where it counts.

[dremster]

call me a fool if you will, but i have a question, yesterday i was bored, had an old bottle of black griffin sitting around. so i took this wack ass magnum and put a hole on one end and dumped the griffin in. it seems wetter i guess. any suggestions on how to realy get the flow going on this marker?????

[Statistics]

What do you mean by FLOW??

[Statistics]

Re: UR WELCOME

 

Originally posted by ASER1NE

ALRIGHT SINCE IM NICE I'LL START THIS OFF.....................

 

Deadly Recipes:

Ok...ive read through alot of ink recipies...but why don't people melt...Well i tryed it....here it goes...fallow steps in order so you don't blow yourself up jackass!

 

First you well need...some kind of metal tin,A lighter...kiwi white shoe polish...the rub on kind,A white meanstreak, some opaque white paint,and white marsh or griffin...

 

Go outside so you dont get cancer a year later.

Cut off a small peice of mean streak.

Throw it in the tin.

Get about a fifth of the lil white shoe polish can in the tin...Light the shit on fire...let it melt down...not till it boils....jack ass..and blow it out

quickly pore into somethin and add opaque paint.

Stir together...add white griffen or marsh...mix well add terpintine and a lil thinner...you figure out how much....pore into mop or marker...And BAAAAAM!...oh yea....make sure you dont light yourself on fire...I'm not responsibul if your ass stupid ass me and try this...but works great...vary permanet...if you do it right.

 

**********************************************************

 

just look...ype the word ink and you have everything you need

but here is one

 

props to the graff inventor!

 

1. get a big mixing bowl or somethin.

2. get something to stir with like a stirrer

3. mix together all of the following-

 

-black india ink

-some marsh or whatever similar brand of ink

-purple rusto paint

-GLITTER, lots of glitter

-your fav color of hair dye

-crack open a HI-LITER and dump the ink in

-maple syrup, not Aunt Jemima, but the real maple syrup thats nice and runny

 

There it is. The amounts of each can be changed depending how much of each you have. Pour it all into your mop or try freezing it and see if it will work like a meanstreak. Anyways, the glitter makes the ink look bad ass and all sparkly in the sun. The maple syrup is for consistency. The HI-LITER ink puts a weird look on the overall ink. I suggest adding in some metal balls or something to shake so the rusto paint and maple syrup stay nice and smooth. Anyways, go ahead and mix it up and pour it into your mop. Shake it up and go bomb. Remember, even though it has tasty maple syrup in it, do not consume this ink. You will get a bad stomache ache. Have fun with the graff inventor death ink and lets all make a big deal out of this like Krink. WOO HOO!

 

********************************************************

 

I've had good results with mixing about 2/3 lacquer thinner with 1/3 alluminum rusto bucket paint. I made a really cool metallic blue, runny paint. It worked well...except if you let the marker sit unused the shit will dry up the sponge/nib. Also, the glitter shit in your ink....I'm just wondering how would the little metal flakes get through the nib, or whatever....maybe your were just joking.

 

***************************************************

 

VHS MARKER

Ok. Here's the recipe.

 

Materials:

VHS tape

screwdriver

exacto knife

craft glue gun and glue sticks (or epoxy)

duct tape

lots of your favorite ink

old sock, or other filler

2 chalkboard erasers

 

You are better off getting one of the VHS tapes with the plastic sleeve, since that's inkproof. First, you pull off the cover that protects the exposed tape. This is where the chalkboad erasers will go. Next, unscrew the tape and take everything out. What you want to do now is use the duct tape and epoxy to seal off the interior, so it won't leak all over you. Don't put the tape back together yet. You need to cut all the plastic junk out, so you can stuff the tape case with filler, and insert the eraser felt. Use the utility knife for this. Remember! Cut away from yourself, so you don't sever an artery or something. Once you're pretty sure the felt will fit into the marker, put it together and seal the edges with the epoxy, and then tape over it.

Ok. We're about halfway there. Now that you have a completely sealed container for your ink, you can cut up your filler and stuff the tape with it. The less you put in, the drippier your marker will be, since there's less to soak up the ink. 3/4 full is a pretty good amount. Now you're ready to put n the nub, or marking surface. Cut up the chalkboard eraser so that it fits into the space. You have to use a full one, and cut some from the second to fill up the remaining space. Once you got this all together, you can epoxy it in place. If you want itto hold together longer, epoxy all the eraser pieces together. Sometimes they fall apart if you don't do this. Make sure the epoxy makes a nice seal around, so all your ink doesn't leak out when you try to write.

Now you can fill with ink and start writing. You shouldn't use this to vandalize other people's property, because that's illegal, and you can get arrested. If you do, that's not my fault. (disclaimer) Have a lot of ink, because it takes a lot to fill this bad boy. Two of the marsh ink bottles from 7th Heaven will do the trick.

Cover with the case the tape came with.

 

------------------

ouija13hiTranscend3a

 

*******************************************************

 

This thread inspired me to make a kiwi mop and it works fine... if you're making your first one just remember to have towels handy, and a sink nearby, but do it outside.. My shirt got a little paint on it, as well as the ground and i ended up needing two more containers... Maybe I'm just retarded..

 

Oh, Also, you can get the carchalk marker things that are for car windows... pop the tops open on those, and put a little paint thinner and bucket paint in em... works just the same, but holds slightly less than a kiwi.

 

Bonus: leave a little bit of shoe polish in and use paint which is opposite in color for a nice tyd-dye ish swirly effect on your mops =] Goodluck!

 

****************************************************

 

Kiwi slush buster is the shit... its clear and you need to add ink to it or bucket aint then you can destroy. also here is a recie for silver ink that rocks hard.

Take a Kiwi Bottle or experts edge shoepolish since it seems to have a dripping mechanism built in or any kind. take off the sponge. Remove the pushy aparatus thing that controls the flow....now it will drip like crazy. You have to cut it out and this should all be done with gloves because painthinner is involved. next take your bucket of rusto bucket silver. drop about half of it into the empty container. drop in a marble or a bolt. Now go outside with the paint thinner as this is seriously toxic shit. Then add it so the bottle is about 3/4 the ways full and then drop in some runny varnish from the hardware store. This should produce an increadibly permanent wet drippy mother fucker of destruction! Have fun be safe and good luck!

 

*******************************************************

 

here's a VERY simple one that works well enough.

Go shop(lift)ting and get a Sanford Inker. It's used to prime rubber stamps. Don't get the one with the ball, that looks like womens deodorant, get the one with a spongy material. It's made squeezable. Oh, get two caps. Then cut the top off the two caps, mount them together and use the good old chalfboard eraser to fill the cap that doesn't screw onto the bottle. Use hot glue to bind the two caps together.

 

this will make a mini-mop with a solid dot that has a 1 inch diameter. Clean, effective,

and the amount of flow is constantly adjustable.

 

But you will want to find a way to add some stickyer ink.

 

*********************************************************

 

WHEATPASTING

Ingredients:

1 cup of wheat flour

1/2 cup of rice flour

3 teaspoons of cornstarch

2 cups of water

 

Combine wheat flour, rice flour, and water in a pot on the stove on low heat. The mixture should be very watery. Stir the mixture constantly with a wire whisk until the paste begins to thicken just a tiny, tiny bit. This may take about ten minutes. Take the pot off of the heat when you start to feel the mixture thickening. In a jar with a lid, combine three teaspoons of cornstarch with a half of a cup of water. Tighten the lid and shake the mixture until there are no lumps of cornstarch that are visible. Add the cornstarch mixture to the flour mixture and stir for another two minutes. Now you are done. Your arm may get tired, so I suggest that you do this with someone else so that you can switch off stirring.

 

I cannot emphasize the importance of stirring enough. Yes, it is tiring, but don't stop.

First post of the thread, i thought mad new people proboboly dont even bother to look through the entire thead. But I have a question, is this true?

 

leave a little bit of shoe polish in and use paint which is opposite in color for a nice tyd-dye ish swirly effect on your mops =] Goodluck!

 

I want to know if this works??

[EwhORE]

I got etch bath and some kinds of garden marker that you do designs on pots with, well I emptied that out and filled it with etch, its great, if you dont push on the nib too hard it comes out perfect with a nice drip, drys pretty fast too, i also have a window chalk thing, i emptied that out, and im going to go fill it up with etch now too, and after that im going to go start making my vhs marker, ill try and post back sometime with some flix of all this stuff... stay up. EORE .es.vk.otk

 

[endlus values on that]

[REZK one]

ok i was wondering how to flare the tip of a pilot broad or a uni paint marker if anyone can answer this question without using the word toy i'll give you a cookie. peace

[Guest JoeHatesCops]

i laways thought a flared tip, was just a busted up nib that was well used, like on silver paint pens I drag it acorss some rough concrete a few times to flare it out.

[REZK one]

yeah that's what i was thinking i just wasn't sure if there was some sort of skill to it of not, it sounds like it's just another thing that you go for it and see what happens.

[WhOZE]

PILOT MARKERS ARE THE SHIZNIT...WHOZE?

[Dirty_habiT]

maybe use a knife to cut the fibers apart, to make it easier to smash down, and the tip will spread apart. normally this makes your marker write like shit, but I'd say over fill it with ink (of your choice) that way, no matter what, ink will come out when you catch your toy tag....ooops I don't get a cookie...fuck!

[Guest Canadiano]

what the fuck? griffin, shoe polish, candle wax with egg yolk, india ink, etch, mixing tin with meanstreak inside, WHAT THE FLYING FUCK???!!!

 

If only you guys could channel your energy towards something useful, like gaining skills in a trade, or even into your bombing style...(not directed at everyone, but I find it amusing, when assuming that half these kids chill up in their rooms mixing egg yolk with black shoe polish for hours on end, rather then going out and bombing with paint on some sweet spots).

[Guest Canadiano]

The furthest I'll modify my Pilot is to cut a strip off the middle with an exacto knife to make it look coooool.

 

The furthest I'll modify my scotch is a tad bit of water in it.

[REZK one]

yeah good idea, i'll do that...put water in my scotch.

[Guest Spemz]

what exactly is a mop?:confused:

[Statistics]

A M-O-P is a container for paint or ink. Like the Body of a marker. The nib is the tip that you write with. blah blah blah. Today im gonna make a straight kiwi. Im micing blue bucket with white shoe polish and mabey some water. to make is a lighter blue. I hope this doesnt get fucked. But whateva.

[Guest Spemz]

Alright man thanks

[Statistics]

Anytime. I just made a white kiwi with just a tint of green, and really really deep blue kiwi and a brown kiwi with a tint of red. I used Providoin Iodine Solution (sp?) to make the brown kinda red. It stained a towel i have like a bitch and i thought it would do the same to a white suface or lighter color wood. Its used as a cleaner for cuts and wounds.

[Guest whoami]

Any of you ever empty them zigs and fill them with Marsh, or Krink?, How do you get that pressure applier to not work, just take it out?

[Statistics]

If you take it out sometimes the nib will just press back into the marker and its useless until you put it back, i just thin my krink utnil its THINNNNNNN.... that works. Do u mean the krink you buy or the krink u make? Cause i make krink.

[Guest whoami]

the krink you make...whats your ingrediants?

[Statistics]

ive heard people say that krink is just silver bucket adn thinner to them, but to me krink is any bucket and thinner or water. Depends. Right now i only have latex house bucket. So im using that and water and some other random shit occasionally. What about you??

[test pattern]

I use oil based bucket paint and rubbing alcohol.

 

I have no paint thinner.

[fizm]

anyone ever used japan drier?

[B_As_In_Bot]

>>NEW QUESTION<<

 

this is a mop question: Would there be much point in flaring out a square nib? I only have 1 of these square nibs..so I dont want to take any chances fucking it all up.

[FROSTY]

Holly shit this threds getting pretty big. I started it and didnt even bother checking it that often

[Statistics]

Yea frost. Yo shit brings mad education to people who are either new or just lookin for some infomation. And what do you mean by FLARING a square nib? Like, Smashing it or cutting lines in it or something else??

[Statistics]

I got an idea, that if it works, will be dope. If you put Latex and Oil based paints into a mop, what will happen? I only have latex but am hoping to get some oil mistints soon enough. Will the paints chemicaly react and be useless? Or will one sit ontop of the other, cause if this is the case, you could probobly shake up your mop and the paints would swirl, making you, a tyedye mop. Anyone ever tried or heard of this?

[wutangbanger]

pilots are dope straight up so damn juicy i used em on a broken tv on the screen that shit turned out dope

[yoink]

happy

 

i just made my first two color meanstreak so im happy bout that, i got two in the mail today and id never used em before i just have markers, so i put the two i got together (purple and black) and they came out smooth as fuck..there pretty nice...i just wanted to share my accomplishment...:rolleyes: :D by the way i tried poking holes in marker tip to get the flow thicker but that wasnt working too well any suggestions?