Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

MARKER SUPERDUPERTHREAD


FROSTY
 Share

Recommended Posts

This forum is supported by the 12ozProphet Shop, so go buy a shirt and help support!
This forum is brought to you by the 12ozProphet Shop.
This forum is brought to you by the 12oz Shop.

I made a marker out of a sof sole scuff and stain remover. It is dope it dosnt really drip though. And the ink is crappy, I used kiwi leather dye and some crappy watter based ink. I put up a handy with it though so it works for a first time marker.

Link to comment
Share on other sites

when thats empty fill it with 3/4 aluminum rusto bucket paint and 1/4 paint thinner or mineral spirits, put a chalkboard eraser in for the nib. and then it'll be a second time marker and it'll kick some serious silver ass. or for a dark color just use some griffin and some dot3 motor oil and a little paint thinner/min spirits and voila! ... and a tip. when you fold the eraser to put it in as a nib, slice it the long way with a razor while its folded in half, helps it to flow better. good luck. peace

Link to comment
Share on other sites

btw that elmers markers pretty dope, but it looks messy, i think you could use a cap from a bottle of suave shampoo or something to keep it from leaking. put a little duct tape on the bottle so the cap will have something to grip to too. peace

Link to comment
Share on other sites

Originally posted by bears_with_knives@May 25 2005, 08:29 AM

domarker.jpg

domarker2.jpg

Still needs some fine tuning, but the result was sweet... The felt tends to pop out of the case and gets stuck in the cap when I popen it. So I have a little bit of work to do on it. But the result came out pretty swell.

 

 

bear don't have knives

 

 

 

kool marker "NO!"

Link to comment
Share on other sites

Originally posted by bears_with_knives@May 25 2005, 01:29 PM

domarker.jpg

domarker2.jpg

Still needs some fine tuning, but the result was sweet... The felt tends to pop out of the case and gets stuck in the cap when I popen it. So I have a little bit of work to do on it. But the result came out pretty swell.

u should make a small hole in the cap so it doesnot create a vacuum and suck the filt out when you take the cap of, see if that works, i usually seal the hole with a bit of tape .

Link to comment
Share on other sites

as for putting a hole in the cap it should be done very small as to only allow the air in and not the ink out. maybe a safety pin. no bigger tho.

and that deoderant mop would be better off if you melted it a bit here and there on top just to hold the nib in place.

Link to comment
Share on other sites

i just make my own marker wit the usual recipe:

 

1-paint mixed with brake fluid

2-put ur paint and fluid in a container (i use anything under 200 mL)

3-tear a strip of felt off of a chalkboard eraser, make sure it fits into the top of the container. make it big because it compacts and it might fall in to the paint.

 

ive got a question.. do u think u can use sponge instead of felt?

also.. can i add anything to the paint to make it more permanent? i dont feel like getting ink.. its too far and expensive :D

Link to comment
Share on other sites

Originally posted by SouthSide514@May 30 2005, 06:45 PM

i just make my own marker wit the usual recipe:

 

1-paint mixed with brake fluid

2-put ur paint and fluid in a container (i use anything under 200 mL)

3-tear a strip of felt off of a chalkboard eraser, make sure it fits into the top of the container. make it big because it compacts and it might fall in to the paint.

 

ive got a question.. do u think u can use sponge instead of felt?

also.. can i add anything to the paint to make it more permanent? i dont feel like getting ink.. its too far and expensive :D

 

wow.. now i read the other recipes that looks like shit

im gonna get ingredients this weekend ;)

Link to comment
Share on other sites

Originally posted by SouthSide514@May 30 2005, 06:45 PM

i just make my own marker wit the usual recipe:

 

1-paint mixed with brake fluid

2-put ur paint and fluid in a container (i use anything under 200 mL)

3-tear a strip of felt off of a chalkboard eraser, make sure it fits into the top of the container. make it big because it compacts and it might fall in to the paint.

 

ive got a question.. do u think u can use sponge instead of felt?

also.. can i add anything to the paint to make it more permanent? i dont feel like getting ink.. its too far and expensive :D

 

yeah you can use a sponge for a nib, you can use fabric too like a sock or somethin

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...