Blackbook Pages Posted October 29, 2011 Share Posted October 29, 2011 I shake my cans well acctually and it doesnt work. Its happend to me with ironlak also. That sucks cause iv acctually lost a few cans cause of that latley. and nah fuck going back to the store to exchange haha Link to comment Share on other sites More sharing options...
Blackbook Pages Posted October 29, 2011 Share Posted October 29, 2011 oh and this might sound wierd but i think i heard someone awhile ago say something about puting them in hot water..? Link to comment Share on other sites More sharing options...
Slyle CMC Posted October 29, 2011 Share Posted October 29, 2011 I shake my cans well acctually and it doesnt work. Its happend to me with ironlak also. That sucks cause iv acctually lost a few cans cause of that latley. and nah fuck going back to the store to exchange haha Not only shake the cans, but do it before it is even test sprayed. The solids have a habit of sitting on the bottom of the can, and if you test spray before shaking they get picked up into the tube and make it next to impossible to spray. This happens alot with older cans of Polyurethane too. You can try a blaster cap (cap with center dot removed) but even that does not always work. Link to comment Share on other sites More sharing options...
autoteller Posted October 30, 2011 Share Posted October 30, 2011 Normally, the older cans have never failed me, but since the switchup, i gotta agree. Hell, just the other day, two, flat blacks clogged up on me after barely two lines, and even then the pressure was fucked. I think this is a batch-by-batch problem that might be recent. Link to comment Share on other sites More sharing options...
HAL Posted November 1, 2011 Share Posted November 1, 2011 It could be that those valves are just shitty. I heard that Rusto switched to them because they're cheaper. Link to comment Share on other sites More sharing options...
eviltrailer77 Posted November 1, 2011 Share Posted November 1, 2011 Another problem I ran in to with those cans is the bottom of some caps will hit the top of the can and wont let you press it down all the way. It will start out working but as the stem seats further in to the orifice, the bottom of the cap starts interfering with the valve travel. When this has happened to me it kinda sputters out. I just trim the offending part w/ a razor knife, and its good to go. Link to comment Share on other sites More sharing options...
Graffkings Posted November 10, 2011 Share Posted November 10, 2011 Artissin is more watery than any other graffiti related spraycan brand. Link to comment Share on other sites More sharing options...
Graffkings Posted November 10, 2011 Share Posted November 10, 2011 Hopefully they'll get it fixed.. I've read alot of mixed reviews on the new male valves. Majority are negative. Thanks for the feedback/input. I'm very disappointed with ARTISSIN, Watery, Bad Coverage, Wierd Pressure...., 2 coats, dusty lines. Definately not worth piecing with.. But still a nice try, just not better than any of the other "good" brands out there. Link to comment Share on other sites More sharing options...
ACER303 Posted November 12, 2011 Share Posted November 12, 2011 New Rusto commercial...."There'll be some changes made..." Changes? Too late Rusto, you fuckers. Talk about the ultimate valve cockblock...this is worse than the Krylon "360 valve" http://youtu.be/b0CD7W5R2a0 you can even download the whole shitty song right on the Rusto website. https://www.rustoleum.com/default.asp Go USA Spraypaint industry...way to keep your biggest demographic happy. :D Link to comment Share on other sites More sharing options...
eviltrailer77 Posted November 12, 2011 Share Posted November 12, 2011 Dude, calm down. That universal shit is old news. The top comes right off and its a wider style male valve under that monstrosity. I have had good results w/ spray starch caps and some glass cleaner caps. Look around and do your footwork. Adapt, improvise, overcome. Link to comment Share on other sites More sharing options...
Graffkings Posted November 13, 2011 Share Posted November 13, 2011 Has anyone tried and can give a little review on theese ? Link to comment Share on other sites More sharing options...
kragtastik Posted November 14, 2011 Share Posted November 14, 2011 Rusto even though the new tips kinda suck but you can still find the old ones Link to comment Share on other sites More sharing options...
STYLEISKING Posted November 14, 2011 Share Posted November 14, 2011 MONTANA CANS FOUNDER RUEDIGER GLATZ STARTS CONSULTANCY NEW PERSPECTIVES IN LIFESTYLE MARKETING Heidelberg, 11 November 2011 – 15 years after establishing MONTANA CANS, the L&G Vertriebs GmbH, Ruediger Glatz, founder and long-time general manager is now leaving the company. He had already sold his shares to MOTIPDUPLI Group ten years ago. Now he parts completely from the company, which he made one of the leading suppliers for Urban Artists worldwide. In the future, he is planning to focus on his activities as an artistic photographer. He has already been successful in this field for a couple of years, showing his works in Frankfurt, Basel, London und New York. Furthermore he founded the image agency BHP. Ruediger Glatz is also about to set up a consultancy branch within BHP, that acts as a link between art and business. Having built the MONTANA CANS brand by using his close ties to famous street artists, he is now able to benefit from his contacts to develop interesting new perspectives in lifestyle marketing and product development. -RUEDIONE http://revok1.com/blog/2011/11/ruedi-leaves-montana-cans/ Link to comment Share on other sites More sharing options...
DEEN XMEN Posted November 19, 2011 Share Posted November 19, 2011 I seriously need to log on to 12oz much more often Its kind of hard keeping up especially with fb. Anyways whatever .. 12oz is a great place for all especially for true writers. ^^; Link to comment Share on other sites More sharing options...
DEEN XMEN Posted November 19, 2011 Share Posted November 19, 2011 Artissin is more watery than any other graffiti related spraycan brand. I'm very disappointed with ARTISSIN, Watery, Bad Coverage, Wierd Pressure...., 2 coats, dusty lines. Definately not worth piecing with.. But still a nice try, just not better than any of the other "good" brands out there. First and foremost I never ever said this was the "best paint" or a 1 coat coverage paint or anything even remotely close to anything like that. As I said from day 1 in order to improve a product you must take the good and the bad. When you have a product there will be people that like it and there will be people that hate it. This is the way things are, do I listen? Of course I listen! Everyone matters to me no matter who they are; From the biggest TOY to the greatest skilled artisian. I am not some rich dude or some huge corporation. I don't got big wig investors like alot of others either. This is what it is and its all me. AT the end of the day whether I fail or I make it I will know that at least I tried. RIDE OR DIE There's a saying that I live my life by "There are those that might doubt you but you must never doubt yourself" In case any of you are wondering I'm doing pretty good so yeah its a good thing for what I stand for and it's a bad thing for those that wanted to see me fail. On a side note look at how many have copied my concept, the difference is I didn't run to china to get it what I'm doing done. I have a different goal and Artissin isn't just about spray paint either. If you know me in person or on my fb you this is a fact. My goal is to get to where I want to be and when I get there be able to help and support others. ___________________________________________________________ By the way dude please post some pics or at least pictures from your "ARTISSIN" cans so we can have some credible proof from you. From looking at your posts it seems that you posted to diss me and when nobody responded to you, you got angry and posted again afterwards. Are you under some 2nd name? Cuz your other 3 previous posts seems to be porn pictures. Link to comment Share on other sites More sharing options...
Graffkings Posted November 19, 2011 Share Posted November 19, 2011 First and foremost I never ever said this was the "best paint" or a 1 coat coverage paint or anything even remotely close to anything like that. As I said from day 1 in order to improve a product you must take the good and the bad. When you have a product there will be people that like it and there will be people that hate it. This is the way things are, do I listen? Of course I listen! Everyone matters to me no matter who they are; From the biggest TOY to the greatest skilled artisian. I am not some rich dude or some huge corporation. I don't got big wig investors like alot of others either. This is what it is and its all me. AT the end of the day whether I fail or I make it I will know that at least I tried. RIDE OR DIE There's a saying that I live my life by "There are those that might doubt you but you must never doubt yourself" In case any of you are wondering I'm doing pretty good so yeah its a good thing for what I stand for and it's a bad thing for those that wanted to see me fail. On a side note look at how many have copied my concept, the difference is I didn't run to china to get it what I'm doing done. I have a different goal and Artissin isn't just about spray paint either. If you know me in person or on my fb you this is a fact. My goal is to get to where I want to be and when I get there be able to help and support others. ___________________________________________________________ By the way dude please post some pics or at least pictures from your "ARTISSIN" cans so we can have some credible proof from you. From looking at your posts it seems that you posted to diss me and when nobody responded to you, you got angry and posted again afterwards. Are you under some 2nd name? Cuz your other 3 previous posts seems to be porn pictures. I'm not at all into dissing you but your product. I just gave you my review on your paint and i definately wasen't impressed, it's a nice thing that you made a new brand from scratch I just saw all your posts in the thread and you were dissing all EU paints out there and I guess it was because it aint cheap in the US (But we still have the best and most precise cans over here) As far as a picture isnt possible as I got rid of the cans right away(On my trip to the US). Hope your company is going strong I just wouldnt spend my money on it again. The two posts was a little lack of brain as I forgot I already wrote about it. The porn pictures is in another thread whats the big deal ? As far as proof try to spray it on a wall and see how it works... Rock On. Link to comment Share on other sites More sharing options...
STYLEISKING Posted November 27, 2011 Share Posted November 27, 2011 how can i help you? Link to comment Share on other sites More sharing options...
LICKERISH Posted November 27, 2011 Share Posted November 27, 2011 Nice racks Link to comment Share on other sites More sharing options...
Slyle CMC Posted November 27, 2011 Share Posted November 27, 2011 are they sweaty? Link to comment Share on other sites More sharing options...
LICKERISH Posted November 28, 2011 Share Posted November 28, 2011 Either that or shes leaking Link to comment Share on other sites More sharing options...
Cracked Ass Posted November 28, 2011 Share Posted November 28, 2011 I'm all set on the paint. You can still help me though Link to comment Share on other sites More sharing options...
jib25 Posted November 28, 2011 Share Posted November 28, 2011 Looking for something pink. Link to comment Share on other sites More sharing options...
crushinshit Posted November 28, 2011 Share Posted November 28, 2011 take all your scrap cans and whack em on the head (the circular metal part on top) with a hammer. represurizes em. great for lak cuz that shit loses pressure. do it right before you go out or its pointless. youre welcome Link to comment Share on other sites More sharing options...
eviltrailer77 Posted November 28, 2011 Share Posted November 28, 2011 No, that doesn't "repressurize" them, it forces the dip tube further down in to the can and you get a few more drops of paint out of the can. The only way to add pressure to any can is by forcing it in from another can, during the manufacturing process or by heating the can up (which technically doesn't add anything just expands whats already there). Link to comment Share on other sites More sharing options...
DEEN XMEN Posted November 28, 2011 Share Posted November 28, 2011 No, that doesn't "repressurize" them, it forces the dip tube further down in to the can and you get a few more drops of paint out of the can. The only way to add pressure to any can is by forcing it in from another can, during the manufacturing process or by heating the can up (which technically doesn't add anything just expands whats already there). Very True Link to comment Share on other sites More sharing options...
Graffkings Posted November 29, 2011 Share Posted November 29, 2011 Dope Cans Link to comment Share on other sites More sharing options...
Schnitzel Posted November 30, 2011 Share Posted November 30, 2011 so graffkings are you spruiking said dope cans? yet another chinese off shoot from the Ironlak factory? Link to comment Share on other sites More sharing options...
DEEN XMEN Posted December 1, 2011 Share Posted December 1, 2011 This dude claimed he came all the way to America and bombed or did pieces and yet he didn't take a single picture. Now he posting pics of "euro" cans which are not Euro cans, its just a matter of time fore' the true euro cans get killed off by brainless bozos supporting them like the said picture poster. Least you posted something that isn't porn for a change. I hope you ain't some cross dressing buffoon from Washington posing like you from Europe. Link to comment Share on other sites More sharing options...
Graffkings Posted December 1, 2011 Share Posted December 1, 2011 You really don't like China I guess :) At least Dope cans is better than yours. :) I did not bomb anywhere as I think its ugly, I did a few pieces and wasen't impressed with your watery shit paint ;) (And again I'm giving you respect for your arrangement in your company) The paint from Europe dosen't need anything, they have enough $$ to live in 20 Decades, at least most of them. Maybe you should start working with China too ? They can show you how to develope some good cans that is actually 100% usable at low prices. You can also come by Fullclip or Italgete in Europe, they can also show you how to make a decent paint formula. And whats the problem by having them produced in CHINA ? It earns more $$ to the EU companys as the prices is below one dollar pr can. 1Dollar can, sold for 5Dollar = Profit. China earns only a bit of it. Its nice to help people in foreign countries getting a job. Also, I support all the companys that have some good paint. And one more photo for you DEEN, guess you like it <3 I stock MOLOTOW IRONLAK CLASH BEAT DOPE MTN And NBQ at the moment. Peace Mr. Grumpy DEEN Btw, I have had quite a few trips to the us during the years.. Why don't you come to EU ? Ohhhhhhhh, because you don't support eu. Link to comment Share on other sites More sharing options...
Graffkings Posted December 1, 2011 Share Posted December 1, 2011 And one more for you my friend.. DEEN XMEN Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.