Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

  1. Welcome to the 12ozProphet Forum...
    You are currently logged out and viewing our forum as a guest which only allows limited access to our discussions, photos and other forum features. If you are a 12ozProphet Member please login to get the full experience.

    If you are not a 12ozProphet Member, please take a moment to register to gain full access to our website and all of its features. As a 12ozProphet Member you will be able to post comments, start discussions, communicate privately with other members and access members-only content. Registration is fast, simple and free, so join today and be a part of the largest and longest running Graffiti, Art, Style & Culture forum online.

    Please note, if you are a 12ozProphet Member and are locked out of your account, you can recover your account using the 'lost password' link in the login form. If you no longer have access to the email you registered with, please email us at [email protected] and we'll help you recover your account. Welcome to the 12ozProphet Forum (and don't forget to follow @12ozprophet in Instagram)!

need help from djs/nerds on a repair job

Discussion in 'Channel Zero' started by Vanity, May 16, 2003.

  1. Vanity

    Vanity Veteran Member

    Joined: Apr 11, 2000 Messages: 7,673 Likes Received: 6
    alright, i'm replacing my groundwire of my technics 1200.
    the biggest help it found was
    http://www.geocities.com/SunsetStrip/Venue...ceRCACables.htm

    i got to step 2, but where i ran into trouble is getting the rca's uncrimped... how do i get them out of the little black box? i dont wanna break it, so that's why i'm hesitant to put too much force on one part of it.
    thanks in advance
     
  2. Born Loser

    Born Loser New Jack

    Joined: Sep 14, 2001 Messages: 63 Likes Received: 0
    http://members.tripod.com/~Suzy116/robot.gif'>

    [img]http://members.tripod.com/~Suzy116/weltron1.gif'>

    [img]http://members.tripod.com/~Suzy116/satnight.jpg'>
     
  3. TEARZ

    TEARZ Guest

    i've done this before, but can't remember a damn thing about the process.... fuck, good luck man.
     
  4. Smart

    Smart Dirty Dozen Crew

    Joined: Apr 14, 2000 Messages: 17,017 Likes Received: 175
    Replacing the Ground wire??

    Replacing the Ground wire is an easy process. The ground for the tonearm is attached to the circuits boards ground via a small black wire. You will notice that your external ground wire is also attached to this same clip that is screwed into the circuit board. Simply unsolder the old wire and attach a new (hopefully longer) wire in its place. Just make sure that you reattach the tonearms ground (comes out from the inside of the tonearm assembly)
     
  5. Vanity

    Vanity Veteran Member

    Joined: Apr 11, 2000 Messages: 7,673 Likes Received: 6
  6. Vanity

    Vanity Veteran Member

    Joined: Apr 11, 2000 Messages: 7,673 Likes Received: 6
    bump for people at work that might be able to help me out
     
  7. Dick Quickwood

    Dick Quickwood 12oz Loyalist

    Joined: Aug 25, 2002 Messages: 14,783 Likes Received: 14
  8. Kr430n5_666

    Kr430n5_666 Banned

    Joined: Oct 6, 2004 Messages: 19,229 Likes Received: 30
Top